barox Kommunikation
45
5.4
SNMP
– Monitoring- and Administration Function
SNMP was developed by the IETF (Internet Engineering Task Force) and as a protocol serves
the purpose of monitoring, control and configuration of network elements.
5.4.1. Configuration of SNMP v2c
The following example describes a basic SNMP v2 configuration f or a system status enquiry or
the transmission of system events via SNMP traps. The following steps shall show the use of an
SNMP Community.
Activation of the SNMP v2 Function
The mode should be generally enabled and SNMP v2 should be selected in the SNM P
configuration. Furthermore the names for the read and write communities are determined.
Summary of Contents for L Series
Page 50: ...barox Kommunikation 50...