Baronmead ROBY T09, Use And Maintenance, Page: 8 / 20

7.5) Electrical connection
The input for the battery charger is an IEC socket. The user
should connect the battery charger to a supply conforming to
the standards for the civil use electrical units, equipped with an
appropriate switch.
Battery charger data:
- Input Voltage: 230V ac.
- Frequency: 50 Hz
- Output Voltage:
24 V dc / 3A
8) PREPARATION FOR DAILY USE
8.1) Control Handle assembly and clamping
a)
Place the control handle (Fig. 11/a) carefully on the mounting bar (Fig.
1/b) on the base.
b) Incline the control handle (Fig. 12/a) as shown by the arrow (Fig. 11/b)
until it is locked to the base.
c) Once the control handle is locked (Fig. 12/a), protect the release lever
pushing on the cover (Fig. 12/b).
WARNING: Ensure that the safety cover is in its proper position.
In this position, the safety switch is activated and the Control
Handle is locked in the work position. To switch on the machine,
insert the key (Fig. 4/e); the push buttons (Fig. 4/a) on the
Control Handle allows the operating
of the tracks forwards - backwards.
* If the red cover is not in its
proper position, drive of the
machine is inhibited
.
13
8.2) Control Handle release
To release the control handle (Fig. 13/a) ,lift the red safety cover (Fig.13/b)
and then, while the release pedal (Fig. 14/b) is being pressed, push the
control handle (Fig. 14/a) forward as shown by the arrow (Fig. 14/c).
8.3) Wheelchair clamping
a)
Insert the key (Fig. 15/a)
for stair climber activation
into its appropriate socket
(Fig. 15/b).
b) Lock the wheelchair brakes. By
pressing down on the control handle,
tilt the mobile stairclimber back onto its
transit wheels and push it under the
wheelchair (Fig. 16/a).
c) Holding the control handle (Fig.
13/a), lift the red cover (Fig. 13/c) with
your foot, exposing the handle release
lever (Fig. 13/b).
d) Press the lever (Fig. 14/b)
downwards in order to release the
control handle (Fig. 14/a) and, push it
forward (Fig. 14/c), bring it to the
wheelchair seat back (Fig. 16/c).
e) Unscrew (Fig. 17/b) the knob (Fig.
17/a) placed on the rear face of the
control handle, push the metallic central
pushbutton (Fig. 17/c) and slide the arms
(Fig. 17/d) until they are brought under
the handgrips of the wheelchair (see Fig.
16).
NOTE: Carry out this operation holding
the crosspiece as shown in Fig. 17/e.
14