Baroness SP05A, Owner'S Operating Manual

Page: 69 / 76

Change of Engine Oil
Caution
Be careful with hot oil, which could cause
burns if it contacts your skin.
Important
When you change the engine oil, be sure to
drain it into a bowl and discard it in
accordance with local laws and regulations.
Important
Be sure to use engine oil that is classified as
API Service Grade SF or higher, with an SAE
Viscosity that is appropriate for the operating
environment (ambient temperature).
Important
Securely tighten the oil level gauge and oil
filler cap.
Change the engine oil more frequently if the
engine oil is contaminated and, especially, if
you use the machine in dusty areas or operate
the engine at high loads or in high
temperatures.
Move the machine onto a level surface and
stop the engine.
Remove the drain plug while the engine oil is
warm, and then drain the oil into a bowl.
Wind new sealing tape around the drain
plug, and then replace it in the engine.
1
gui678-007
Change of Engine Oil_001
1 Drain plug
1.
2.
3.
Remove the oil filler cap, and then supply
new engine oil until the oil reaches a level in
between the upper and lower limit lines on
the oil level gauge.
Supply 1.0 dm
3
(1.0 L) of engine oil, remove
the oil level gauge, and then insert it all the
way to check the oil level.
After checking the oil level with the oil level
gauge, add more engine oil if it is insufficient.
The engine oil quantity (including the oil
filter) is approximately 1.6 dm
3
(1.6 L).
Replace the oil filler cap.
1
2
bgmiun-004
Change of Engine Oil_002
1 Oil level gauge
2 Oil filler cap
It will take a while for the supplied engine oil
to descend into the oil pan.
Check the oil level again 10 to 20 minutes
after supplying the oil.
4.
5.
6.
7.
Maintenance
SP05A
Maintenance
Page 5-17
Maintenance Work