Baroness LM551, Service Manual, Page: 149 / 213

4
A
8zwqsz-003
Adjustment of the Push-Pull Cable_003
1 Push-pull cable
2 Pedal side adjustment bolt
3 Lock nut
4 Forward travel pedal
A 148.0 mm (5.83 in)
Check that the traveling speed is accurate
after adjusting the push-pull cable.
Reference:
"Adjustment of Traveling Pedal" (Page
6-5)
Adjustment of Traveling Pedal
Continuous use of traveling pedal may result in
a change in the range of motion.
Inspect it and, if necessary, make adjustments.
Apply the parking brake, and then stop the
engine.
Check that the piston pump has been
adjusted to the neutral position.
Check that the push-pull cable has been
adjusted.
Temporarily adjust the thread of the forward/
reverse pedal stopper bolt to 20.0 mm (0.79
in).
1
2
A
4
3
A
q5w4la-002
Adjustment of Traveling Pedal_001
7.
1.
2.
3.
4.
1 Forward travel pedal
2 Reverse travel pedal
3 Stopper bolt for forward travel
4 Stopper bolt for reverse travel
A 20.0 mm (0.79 in)
Press the forward travel pedal and check
that the stopper bolt for forward travel is in
contact with the stepped plate. Then, turn it
another one and a half turns and tighten the
lock nut in that position.
3
2
1
q5w4la-003
Adjustment of Traveling Pedal_002
1 Stopper bolt for forward travel
2 Stepped plate
3 Lock nut
Press the reverse travel pedal and check
that the stopper bolt for reverse travel is in
contact with the stepped plate. Then, turn it
another one and a half turns and tighten the
lock nut in that position.
1
3
2
q5w4la-004
Adjustment of Traveling Pedal_003
1 Stopper bolt for reverse travel
2 Stepped plate
3 Lock nut
Start the engine and then drive the machine.
5.
6.
7.
Main Vehicle
LM551
Main Vehicle
Page 6-5
Adjustment