Baroness LM331, Service Manual, Page: 112 / 165

1
6vnrkf-004
Adjustment of Drum Brake_004
1 Brake adjustment tool
Apply and release the parking brake
several times, and turn the adjustment
gear again until it does not turn any more.
Turn the adjustment gear back 8 or 9 teeth
so that there is clearance between the
brake drum and brake shoe.
1
2
6vnrkf-005
Adjustment of Drum Brake_005
1 Flat-blade screwdriver
2 Adjustment gear
With the parking brake released, turn the
brake drum by hand and check that there
is no rubbing sound between the brake
drum and brake shoe.
Follow the same steps to adjust all brake
drums.
Adjust the brake wire.
"Adjustment of Brake" (Page 6-4)
[3]
[4]
[5]
3.
4.
Adjustment of Brake
Danger Danger
If the brake wire becomes broken, the
machine will be unable to stop and is
extremely dangerous.
If there are cracks, damage or other defects,
replace it immediately.
Adjust the brake wire if the brakes become
less effective.
Important
Adjust the brake wire so that there is minimal
play with the brake lever, and so that the
brakes do not drag when the brake is
released.
Adjust the foot brake by tightening the
adjustment bolt on the brake wire.
Braking force will decrease if there is more
play with the brake lever, and the brake
pedal will feel lighter.
Reducing play with the brake lever will
increase braking force and make the
brake pedal feel heavier.
2
1
3
nfzln9-007
Adjustment of Brake_001
1 Brake wire
2 Adjustment bolt
3 Brake lever
Start the engine and drive to check the
following.
Make sure that heat is not generated in
the brake area.
Make sure that the left and right brakes
are equally effective.
1.
･
･
2.
･
･
LM331
Main body
Page 6-4
Adjustment