background image

USB Socket

Important

Do not use the USB socket in rainy weather to
avoid malfunction of devices.

Use the USB socket to charge or power USB
devices such as smartphones.
When the ignition key set to the "ON" position, it
is energized and the blue indicator lights above
the USB ports.

Set the ignition key to the "ON" position.
Open the protective cover.

2

1

F4B81826

USB Socket_001

1

USB port

2

Protective cover

Select a port according to the device
connectivity.
The output power is DC5 V 4.2 A Max (2.1 A).

2

1

8186758A

USB Socket_002

1

2.1 A

2

Indicator

Insert the device USB plug into the port.
The blue indicator lights when applying
current.
Close the protective cover after use.

1.
2.

3.

4.

5.

Steering Height Adjustment Lever

The position of the steering arm can be adjusted
with the steering height adjustment lever.

Tilt the steering height adjustment lever to the
"Release" position to release the lock and
adjust the position of the steering arm.
Tilt the steering height adjustment lever to the
"Lock" position to lock the position of the
steering arm.

B

A

1

BB8A8241

Steering Height Adjustment Lever_001

1

Steering height adjustment lever

A

Lock

B

Release

Steering Angle Adjustment Lever

The angle of the steering wheel can be adjusted
with the steering angle adjustment lever.

Pull the steering angle adjustment lever to
release the lock and adjust the angle of the
steering wheel.
Push the steering angle adjustment lever
forward to lock the angle of the steering
wheel.

A

B

1

A2E02AB9

Steering Angle Adjustment Lever_001

1

Steering angle adjustment lever

A

Lock

B

Release

1.

2.

1.

2.

Description of Functions

LM311

Description of Functions

Page 4-5

USB Socket

Summary of Contents for LM311






















































































Reviews: