Maintenance Schedule
Follow the maintenance schedule below.
○・・・
Inspect, adjust, supply, clean
●・・・
Replace (first time)
△・・・
Replace
Maintenance Item
Before work
After work
Every 8 hrs.
Every 10 hrs.
Every 50 hrs.
Every 100 hrs.
Every 200 hrs.
Every 250 hrs.
Every 400 hrs.
Every 500 hrs.
Every year
Every 2 years
Every 4 years
When Required
Remarks
Engine
Tightening the parts
○
Fuel
○
Air cleaner
○ △
Engine oil
○ ● △
8hrs (first time)
Ignition plug
○ △
Cleaning the exterior
○
Main body
Tightening the parts
○
Interlock system
○
Electrical wiring
○
Reel cutter
(Cutting cylinder)
○
Refer to "Inspection
of Reel Cutter
(Cutting Cylinder)
and Bed Knife
(Bottom Blade)"
Bedknife
(Bottom blade)
○
Refer to "Inspection
of Reel Cutter
(Cutting Cylinder)
and Bed Knife
(Bottom Blade)"
Operating height
(Mowing height)
○
Blade engagement
○
Greasing, oiling
○
Refer to "greasing
point"
Tire
○
Refer to "Inspection
of Tires"
V-belt
○ △
Brake
○ △
Refer to "Inspection
of Brake"
Brake wire
○ △
Refer to "Inspection
of Wire"
Throttle wire
○ △
Refer to "Inspection
of Wire"
Reel cover
○
Refer to "Inspection
of Covers"
Belt cover
○
Refer to "Inspection
of Covers"
Maintenance
LM180C
Maintenance
Page 5-3
Maintenance Schedule
Summary of Contents for LM180C
