Change Lever
Important
Do not change the lever position during
traveling. Otherwise, the transmission may be
damaged.
The change lever is a transmission device.
It was adapted from a direct change system.
To change the speed, park the machine on
level ground, and then engage the lever in the
desired position.
Forward
1
3.1 km/h
2
6.4 km/h
3
9.4 km/h
Backward
R
3.1 km/h (1,800 rpm)
1
u1v7hf-001
Change Lever_001
1
Change lever
Traveling Clutch Lever
Warning
Be careful of the machine suddenly
accelerating when the machine starts to travel
if the throttle lever is set to the "High speed"
position.
Warning
The machine may suddenly accelerate if the
clutch is abruptly operated.
To prevent sudden acceleration, pull the
traveling clutch lever slowly.
Start the machine while allowing the belt to slip
in the same way as clutch-slipping.
When the traveling clutch is set to the "ON"
position, the reel cutter automatically rotates
when the mower unit is lowered.
When the traveling clutch is set to the "OFF"
position, the reel cutter does not rotate, even if
the mower unit is lowered.
1
A
B
8laj2y-003
Traveling Clutch Lever_001
1
Traveling clutch lever
A
ON
B
OFF
LM180C
Handling Instructions
Page 4-16
Operation Method
Summary of Contents for LM180C
