Baroness LM180C, Owner'S Operating Manual

Page: 26 / 66

Fuel
Inspection of Fuel Supply
Observe the fuel gauge located on the fuel
tank to check the fuel level.
1
guc5f6-001
Inspection of Fuel Supply_001
1 Fuel gauge
Fuel Supply
Warning
Do not supply fuel above F (FULL) level of the
fuel gauge.
If you supply too much fuel, it might overflow
from the fuel cap when you travel or work on a
slope.
Warning
Keep fire away while refueling.
Do not smoke while refueling.
Warning
Supply fuel after the engine is stopped and
has well cooled down.
Caution
Pay attention not to touch hot parts.
If the fuel gauge located on the fuel tank
indicates a level close to E (EMPTY), supply
lead-free gasoline for automobiles at your
earliest convenience.
The fuel tank capacity is approximately 6.0
dm
3
(6.0 L).
Fuel Strainer
Inspection of Fuel Strainer
The fuel strainer is installed near the fuel tank
and cleans the fuel that enters the carburetor.
If the fuel flow is insufficient, clean or replace
the fuel strainer as necessary.
Make sure that there is no fuel leakage.
Make sure that the fuel strainer is not
damaged or dirty.
Cleaning of Fuel Strainer
If dust or dirt accumulates in the fuel strainer,
the fuel flow will become insufficient.
Periodically clean it.
Important
Clean the fuel strainer in a clean location, free
of dust and dirt.
Close the fuel cock of the fuel filter.
Remove the strainer cup from the fuel cock.
Clean the filter and the inside of the strainer
cup with a solvent, such as hardly
flammable kerosene.
Dry with compressed air.
1
2
3
1hecmb-003
Cleaning of Fuel Strainer_001
1 Fuel cock
2 Packing
3 Strainer cup
1.
2.
1.
2.
3.
4.
LM180C
Handling Instructions
Page 4-6
Inspections