background image

- 7 -

2. Safety operation

Blades  rotate  at  high  speed  in  the  mowing  machine  under  severe  conditions  such 
as vibration, slope, and dust.  Operation conditions are subject to the place of use, 
existence of obstacles, condition of grass, etc.  We sincerely desire that users should 
inspect  and  maintain  the  machine  completely,  make  efforts  to  master  the  machine 
operation skill, take measures for safety, use the machine correctly so as not to do 
harm to others, and give top priority to safety operation.

Wear  proper  clothes  that  will  not  be  caught  in 
the  machine,  and  wear  protective  gear,  goggles, 
shoes, helmet, and gloves.  
An  apron  and  a  towel  wound  around  the  waist, 
as  well  as  long  strings  especially,  will  cause  the 
operator to be caught in or pulled into the machine, 
which  is  dangerous.  Provide  a  fire  extinguisher, 
first aid kit and secure a means of communication 
to deal with an emergency.

Clothes for safety

Avoid such operation

2-1

 Do  not  use  the  machine  when  you  are  tired.    When  you  feel  tired  while 
using the machine, stop the work and take a rest.
Sick people, drunken people, and people under the influence of drugs are 
not  allowed  to  use  the  machine.   The  visual  sense,  nimbleness  in  action, 
and judgment will be adversely affected.
When you are unfamiliar with machine operation, read the handling method 
and  safety  precautions  to  understand  them  well  before  operating  the 
machine.  Do not allow children to use the machine.

2-2

When  lending  the  machine  to  others,  an  unexpected  accident  may  occur 
because they have no knowledge about the safety precautions and handling 
method shown in the operation manual.  Hand over the operation manual and 
tell them to read it carefully before using the machine, explaining the handling 
method well.

When lending the machine to others

2-3

Do not operate the machine with mown grass, dust, etc. accumulated in the cover, 
V-belt or around the engine or the transmission, otherwise fire or other trouble may 
result.    Remove  them  carefully.    Improper  maintenance  and  incorrect  operation 
and dry grass  mowing might cause fire.  Clean and check the machine as shown 
below before and during work.
Remove dry grass, dust, and other obstacles from around the muffler and engine.
Check the fuel hose for cracks due to deterioration.
Check for fuel leakage during fuel supply.
Fuel supply during engine operation is prohibited.
Check the wiring to prevent fire due to a short circuit.
Inspect the fuel tank and carburetor for fuel leakage due to operation on a slope.
Be sure to carry a fire extinguisher and water etc. when mowing dry grass.

Prohibition of nighttime traveling and work

The  machine  is  not  provided  with  any  lighting  equipment.    Do  not  operate  the 
machine at nighttime or when the visibility is poor due to bad weather, etc.

2-5

Do not remodel the machine.  Use genuine parts for maintenance to ensure safety.

Remodeling of the machine prohibited

2-6

The protection cover is used to prevent stones, etc.  from scattering foward.  Be sure 
to lower the protection cover during mowing operation.
The antiscattering chain is also used to prevent stones, etc.  from scattering forward.  
Be sure to install the chain to prevent damage to human beings, buildings, vehicles, etc.
However,  due  to  the  structure  of  the  machine,  the  protection  cover  and  the 
antiscattering  chain  can  not  prevent  all  the  objects  from  scattering.    Even  when 
installing  these  equipments,  always  exercise  due  care  for  surrounding  area 
(especially for forward) during operation.

        Protection cover and Antiscattering chain

Fire prevention

2-4

Observe the precautions in "1. Precautions as to use" and "2. Safety operation" and 
pay sufficient attention to the area around the machine during operation.

-     -

5

CAUTION

WARNING

WARNING

C A U T I O N

C A U T I O N

Never  use  the  machine  for  tree  felling  and  wood  chipping,  tilling  the  farmland,  or 
some  works  other  than  mowing,  otherwise  the  machine  may  lose  its  knife  balance 
and cause failure.

Prohibition of work other than mowing

2-7

C A U T I O N

WARNING

CAUTION

1

2

3

1
2
3
4
5
6
7

Summary of Contents for HMC1560





































Reviews: