plunger from defective micro switch. Identify or mark
wires disconnected to ensure proper placement and
connection when reinstalling.
8.
Insert spring and plunger into the shaft of the new
microswitch. Position microswitch on mounting studs
and secure with two screws. Reconnect the wires as
identified or marked in Step 7.
9.
Reposition motor and secure with four screws and
nuts.
10. Reinstall case and secure with four screws.
11.
While holding the rubber mixing cup securely, secure
mixing cup to counterweight with the hold down screw.
12. Reconnect mixer to power supply.
To Replace Motor
1.
Disconnect mixer from power supply.
2.
While holding the rubber mixing cup securely, loosen
the screw holding the cup down and remove the cup
from the counterweight.
3.
Turn mixer upside down and remove the four screws
securing case.
4.
Turn mixer upright and remove case.
5.
Remove four screws and nuts securing motor.
6.
Disconnect wires from motor. Identify or mark wires
disconnected to ensure proper placement and connec-
tion when reinstalling.
7.
Remove the counterweight assembly, bracket and
damper springs from top of motor.
8.
Remove the six mounting studs and the microswitch
assembly from bottom of motor.
9.
Reinstall the components removed in Steps 7 and 8 to
the new motor.
10. Reconnect the wires as identified or marked in Step 6.
11.
Reposition motor and secure with four screws.
10
M
AINTENANCE AND
S
ERVICING
Summary of Contents for Maxi Mix Plus M63210-33
Page 15: ...15 ...
