Barnes BP25VF, Installation Manual, Page: 3 / 12

3
DISCHARGE ....................... 1½” NPT, Female, Vertical
LIQUID TEMPERATURE .... 77°F (25°C) Continuous
MOTOR HOUSING ............. Cast Iron
BODY & STRAINER ........... Thermoplastic
IMPELLER:
Design ............ Multi-Vane
Material ........... Thermoplastic
SHAFT ................................. Carbon Steel
SQUARE RINGS ................. Buna-N
HARDWARE ....................... 300 Series Stainless Steel
PAINT .................................. Air dry enamel
SEAL Design ............. Single Mechanical, Oil Filled
Material ........... Carbon/Ceramic/Buna-N
Hardware - 300 series stainless steel
CORD ENTRY ..................... 10 Ft. (3m) Cord with Plug and
pressure gromment for sealing and
strain relief.
LOWER BEARING:
Design ............. Sleeve
MOTOR: Design ............. Oil Filled
Insulation ........ Class B
SINGLE PHASE .................. Shaded Pole Includes Overload
Protection in Motor
LEVEL CONTROLS:
BP25A ............. Wide Angle, Mechanical, 10 Ft. (3m)
Cord
BP25VF .......... Vertical Float, PVC, Snap Action,
10 Ft. (3m) cord
MINIMUM SUMP DIA:
BP25A ............. 18” (457mm)
BP25VF .......... 11” (279mm)
SECTION: A - PUMP SPECIFICATIONS
inches
(mm)
Model: BP25VF
Model: BP25A
IMPORTANT !
1.) PUMP MAY BE OPERATED “DRY” FOR EXTENDED PERIODS WITHOUT DAMAGE TO MOTOR AND/OR SEALS.
2.) THIS PUMP IS APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS I DIVISION II HAZARDOUS LOCATIONS.
3.) THIS PUMP IS NOT APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS I DIVISION I HAZARDOUS LOCATIONS.
4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED
IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS
NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT
WITH PUMPED MEDIA IS A COMMON OCCURRENCE.