background image

 

 

Barkmate BM4200 Dog Training System 

Operation Guide 

 

SAFETY INFORMATION 

 

Aggressive Dogs 

DogMaster Trainers highly recommends consulting a dog trainer when using an E collar on aggressive dogs. 

Do no use this product to correct dogs that are aggressive towards other dogs or people. If you are unsure 

if this product is appropriate for your dog, please consult your veterinarian or certified trainer. 

Proper Fitting of the Collar

 

It is important to have a tight-fitting collar. A loose-fitting collar can move around on a dog’s neck. The dog 

may not feel the stimulation when the collar is loose and the contact probes could rub on the dog’s skin 

and cause irritation. 

Duration of Wear

 

Do not allow the dog to wear the collar for more than 10 hours a day. Leaving the collar on the dog in same 

spot for an extended period can cause skin irritation. If the dog is wearing the collar for long periods, 

occasionally move the contact area a little bit so that the probes are not staying in the same spot all the 

time. 

Finding the Best Stimulation Level

 

Every dog reacts to the stimulation differently. It is important to find out the right level of stimulation for 

your dog. Always start from the lowest setting (1) and increase slowly until you can see that the dog reacts 

to the stimulation.

 

 
 

 

Summary of Contents for BM4200









Reviews: