ASSEMBLY INSTRUCTIONS
18
GAS FIREPIT SYSTEM LEAK TEST
NEVER USE AN OPEN FLAME TO TEST FOR LEAKS AT ANYTIME.
A GAS LEAK TEST MUST BE PERFORMED BEFORE FIRST USE OF THE
GAS FIREPIT SYSTEM.
(Perform in a well ventilated area)
1. Confirm all appliance control knobs are in the off position.
2. Open the gas control valve on the gas bottle.
3. Check for leaks by brushing soap solution over all gas system joints,
Including all valve connections, hose connections and regulator
connections. If bubbles form over any of the joints, there is a leak. Turn off
the gas supply and retighten that joint.
4.
Repeat the test.
If the bubbles form again
STOP
trying and contact your local retailer for
assistance.
LEAK TEST ANNUALLY AND WHENEVER THE GAS BOTTLE IS
REMOVED OR REPLACED.
Summary of Contents for TENBY T3NBDINIGREY
Page 23: ...ASSEMBLY INSTRUCTIONS 23...
Page 24: ......
