INSTALLING LP GAS TANK
Connect LP Gas Tank
Before connecting, be sure that there is no debris
caught in the head of the LP gas tank, head of the
regulator valve or in the head of the burner and
burner ports.
Connect regulator/hose assembly to tank by
turning knob clockwise until fully secured into
position.
Disconnect LP Gas Tank
Before disconnecting make sure the LP gas tank
valve is "CLOSED".
Disconnect regulator/hose assembly from LP gas
tank by turning knob counterclockwise until it is loose.
Caution:
LP gas tank must be properly disconnected
and removed prior to moving this pit.
This appliance can use with LPG-Propane
Suitable LP gas tank size for this appliance is no bigger than 50mm (h) by 325 mm (d)
Max Weight 9kg (20lb)
LEAK TESTING
WARNING: Before using this outdoor fire pit, make sure you have read, understand and
are following all information provided in the Dangers and Warnings. Failure to follow
those instructions can cause death, serious injury or property damage.
WARNING
Never use your fire pit without leak testing all gas connections, hoses and propane tank.
DANGER
To prevent fire or explosion hazard:
♦ DO NOT smoke or permit ignition sources in the area while conducting a leak test.
♦ Perform test OUTDOORS in a well-ventilated area that is protected from the wind.
♦ Never perform a leak test with a match or open flame.
♦ Never perform a leak test while the fire pit is in use or while the fire pit is still hot.
WHEN TO PERFORM A LEAK TEST:
● After assembling your fire pit and before lighting for the first time, even if purchased fully assembled.
● Every time the LP gas cylinder is refilled, exchanged or if any of the gas components are disconnected or
replaced.
● Any time your fire pit has been moved.
● At least once per year or if your fire pit has not been used for more than 60 days.
CAUTION Strong odors, colds, sinus congestion, etc. May prevent the detection of propane
by smell. Use caution and common sense when testing for leaks.
WARNING: Make sure LP gas tank valve is closed. Close by turning valve clockwise.
Place the LP gas tank upright into the tank tray and secure the tank.
LP GAS
