BARIX AG
| Ringstrasse 15 A | CH-8600 Dübendorf | T + 41 43 43322 11 | www.barix.com
Page 4
/
5
Define the "Server Type" setting.
Choose "Icecast Server" to have the device act as an Icecast server that provides a stream for up to 100 listeners.
Choose "Icecast Source" to feed an external Icecast server.
Step 6
Define the "Stream Destinations" settings
Icecast Name: Define a name for your Icecast server or source (up to 32 characters)
Icecast Description: Define a description for your Icecast server or source (up to 32 characters)
Icecast Genre: Define the genre for your Icecast server or source (up to 32 characters)
Mount Point: Define the mount point of your server
Remote URL: Enter the URL address the stream will be sent to
Audio Port: Enter the port of the Icecast server used to give the listener(s) access to the stream
Username: Type in the stream username of the Icecast Server
Password: Type in the stream password of the Icecast Server. After configuring these fields, press OK to close the wizard. Changes
will apply automatically.
Compliance and further Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the device into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
