BARIX Exstreamer 1000, Product Manual

Page: 11 / 14

Mechanical Information
The Barix EXSTREAMER 1000 aluminum enclosure measures 216 x 38 x 125 mm (Width, Height, Depth) /
8
½ ” x 1 ½ ” x 5”. The three D-sub 9 pin connectors stand out approximately 5 mm (Audio) and 6 mm / ¼ ”
(RS-232) and therefore increase the overall depth to 131mm / 5 ¼ ”.
The Barix EXSTREAMER 1000 weighs only 620 grams / 21.87 oz. (without any cables).
The Barix EXSTREAMER 1000 features two T-shaped slots (see detail A in rear plate drawing) on the bottom
and a slot on the left and right side each, which can be used for mechanical fixation.
The Barix EXSTREAMER 1000 has a standard rack height unit (1 HU) and a half 19” rack width and features
T-shaped slots which can be used for mechanical fixation. The Barix “Rack Mount” (sold separately) can be
used for mounting up to two devices. See separate product sheet for details.
Using the Barix Y-Cables (analog and/or digital) from the Barix “Cable Set XLR” (sold separately, see photo
below) one has to plan for a total depth of 200 mm / 8” to accommodate the connector(s) and a sufficient
bending radius for the Y-cable(s).
The Barix EXSTREAMER 1000 is a low power consumption device (8W max.) with an operating temperature
range of 32 ~ 104° F / 0 ~ 40° C.
Nevertheless an adequate space around the enclosure is needed to allow for sufficient air flow in order to
prevent overheating, especially when mounted in racks with higher power consumption devices or in a high
temperature environment.
Dimensions
19” Rack
Mounting
Space
requirements
Thermal
considerations
Weight
Mounting