background image

E X S T R E A M E R

1 2 0

Quick Install Guide Version 1.0

Advanced multiformat 
network audio decoder

Package contents

a

Exstreamer 120

b Power supply
c

RCA Stereo cable

d IR remote control
e Batteries (2 x AAA)

Cable Set AUDIO (not included)

f

Earphone

g

RCA Stereo cable

h Network cable
i

Serial cable

Firmware

This device comes preloaded with the Streaming Client firmware. Alternative firmware,
such as the standard Exstreamer firmware, can be downloaded from www.barix.com. 

Support

For support please contact your local dealer or visit www.barix.com.

© Barix AG 8/2010, all rights reserved. All information is subject to change

without notice.  All mentioned trademarks belong to their respective owners

and are used for reference only. Barix, Exstreamer and SonicIP are trade-

marks of Barix AG, Switzerland, and are registered in certain countries.

Summary of Contents for EXSTREAMER 1 2 0

Page 1: ...vice comes preloaded with the Streaming Client firmware Alternative firmware such as the standard Exstreamer firmware can be downloaded from www barix com Support For support please contact your local dealer or visit www barix com Barix AG 8 2010 all rights reserved All information is subject to change without notice All mentioned trademarks belong to their respective owners and are used for refer...

Page 2: ...ndard stereo mini jack 3 5 mm 5 IR sensor Sensor for the infared remote control Rear view A B C D A Line out Stereo RCA line outputs B RS 232 serial port DSub 9 pin male Pin 4 will provide 2 6V less than the supplied voltage onVin D but not more than 12V C LAN port 10 100 RJ45 Standard RJ45 Ethernet socket D Power Pin Description 1 Relay common 2 Receive Data RxD 3 Transmit Data TxD 4 V 12V 100mA ...

Page 3: ...l search the network for a free IP address this could take up to 5 minutes If the IP address is not announced check if the right hand LED of the network port C is lit green If it stays dark check your network cabling If the front LCD 3 stays dark check the power cabling step 3 If still no IP address has been announced revert the device to its factory default settings by pressing the Reset button f...

Page 4: ...Look for the Exstreamer s MAC address printed on a label placed on the bottom of the device 12 hex digits separated by a hyphen every 2 digits Type into the windows command window arp s 192 168 0 6 00 08 E1 00 B1 77 and hit the Enter key replace the digits according to your devices MAC address On a OSX or Linux system type into the terminal arp s 192 168 0 6 00 08 E1 00 B1 77 STEP 5 Now we have to...

Reviews: