•
INSTALLING
DOOR
HANDLE
•
NOTE
: The handle is delivered in a separate package with screws included in the carton.
•
HANDLE
(fig.2)
•
Reveal two small holes on the door frame from inner side by pulling out a bit the door seal (fig.2).
•
Align the handle to the holes in the door frame and insert and fix the screws from the inside of the unit. Replace the door seal.
• OPERATION
•
ON
/
OF
F
• Press for 3 seconds for normal working.
• Press for further 3 seconds to power down and enter standby mode.
•
LIGHT
• To turn on / turn off internal
LED
s, press this control.
NOTE
: in Standby mode this key is invalid.
•
UP
ADJUSTMENT
T
• Press once to show current setting. Hold to adjust setting (+1
o
C per step). Release to set value.
•
DOWN
ADJUSTMEN
T
•
Press once to show current setting. Hold to adjust setting (-1
o
C per step). Release to set value.
•
CHILD
LOCK
• To lock controls, press both buttons at the same time for 3 seconds. To unlock controls press both keys at the same time for 3 seconds.
• o
F /
o
C UNITS
• To switch display from Centigrade to Fahrenheit press both keys at the same time.
•
STORAGE
GUIDELINES
• Each shelf is designed to carry 1 or 2 layers of bottles. More than 2 layers of bottles on one shelf are not recommended.
• Each shelf pulls out partly to store wine bottles easily.
• Open the door straight enough before pulling out shelves.
•
The shelf in front of the fan should be avoided if possible, to avoid blocking the air inlet and affecting the cooling efficiency.
• If the wine cooler is empty for a period, it is recommended to turn it off, clean and dry it carefully and open the door for ventilation.
• Below table is the recommended temperature for wine storage.
fig.1
fig.2
