3
• This appliance is intended to be used in
household and similar applications such as
staff kitchen areas in shops, offices and other
working environments; holiday homes, hotels
and other residential settings; and catering
and similar non-retail applications.
• This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of knowledge and
experience if they have been given supervision
or instruction concerning the use of the
appliance in a safe way and understand the
hazards involved. Children shall not play with
the appliance. Cleaning and user maintenance
shall not be made by children without
supervision.
• INTRODUCTION
•
Premier 46 litre capacity minibar using direct
compressor cooling technology to give a
temperature range between 3-10°C. Built-in
thermostat to control temperature to user’s
preference. Design features two strong
removable wire rack shelves, internal LED light
and built-in security lock. Energy Efficiency
Class E. Ventilation Space - a minimum space
of 50mm is required for the rear of the fridge
and 30mm for the top and both sides. This will
maximise the efficiency, performance and
life of the fridge and also ensure that there
is sufficient space for the hinge to operate
effectively.
• SPECIFICATION
• Model no: DH12.V2
•
Temperature range: 3-10°C
•
Rated current: 0.6A
•
Voltage: 220-240V
•
Frequency: 50Hz
•
Energy efficiency class: E
• Noise level: 42dB
•
Volume: 46L
•
Dimensions (W x D x H): 440 x 470 x 530mm
• INSTALLATION
• This unit is designed to be free-standing.
•
Ventilation Space - a minimum space of 50mm
is required for the rear of the fridge and 30mm
for the top and both sides. This will maximise
the efficiency, performance and the life of the
fridge and also ensure that there is sufficient
space for the hinge to operate effectively.
• Locate the unit away from direct sunlight or
sources of heat i.e. radiator, stove etc. Extreme
or cold ambient temperatures may also
prevent the unit working effectively.
• DO NOT
locate the unit in a damp or moist
location.
•
Ensure that the floor surface is strong and
stable enough to support the unit when it is
fully loaded.
• Level the unit when in location by using the
adjustable levelling feet in each corner.
• Once in position allow the unit to rest for an
hour before turning it on.
•
Allow the unit 2-3 hours to reach set
temperature after switching on before placing
any items in the compartment.
• The unit is capable of having the door opening
handed.
• To change door opening, carefully remove the
door upper hinge cap using a flat blade.
• Loosen the three cross head screws, remove
the hinge and lift off door.
• Remove lower hinge bracket and replace with
front foot from the other side.
• Remove hinge hole plug and place into
opposite side.
•
Loosely fix the lower hinge bracket to its new
position and carefully locate door in place.
•
Loosely fix upper hinge in place.
• Check that the door is properly closed, sealed
and level before tightening all screws.
• OPERATION
• The temperature control dial is accessed at
the rear of the unit in the lower right corner.
• To turn the unit on, rotate control knob from
the O (off) position.
• Rotate control knob to the required value .
A setting of ‘5’ will create maximum cooling
effect (approx. 3
0
C) and ‘1’ will set working
internal temperature at approximately 10
0
C.
• When the set temperature is reached, the
compressor will stop working.
•
On first use, set the temperature to maximum
e.g. ‘5’. and adjust to suit once this is reached.
• Use the rocker switch close to the control
knob to turn on the unit’s internal light.
