44
PTO SHAFT ON THE MACHINE
- Insert the PTO shaft onto the splined shaft of the
machine while holding down the safety plug
-release the safety Plug and pull with the PTO shaft until
the plug engages with an audible "clack" in its seat.
-If you do not hear the click of the plug, repeat the
procedure.
Do not use a PTO shaft without adequate protections in accordance with
legal requirements.!
Absolutely avoid to overstep the lifting arms area during the work
operation.
If the machine is connected for the first time to the tractor, please ensure that:
in maximum steering conditions the PTO shaft is completely closed do not cause damage
to the gearbox. In the event that the PTO shaft is too long it must be cut shorten
MINIMUM OVERLAP OF THE TWO TELESCOPIC TUBES SHOULD NEVER BE LESS
THAN 1/3 OF THE LENGTH OF THE HOSES SELF.
Before using the machine please familiarize yourself with the controls
The safety of the operator and those nearby depends on its judgment and
prudence in the use of the machine.
Therefor it is necessary to know the location and function of all controls.
The equipment has to be always in perfect working conditions and has to be repaired
only using original spare parts
6.2 UNCOUPLING THE MACHINE FROM THE TRACTOR
6.2.1 MOUNTED MODELS
When parking the equipment , the operation to do are follows:
-actuate the parking brake of the tractor,
-stretch/open/lower/place the feet of the machine (if any),
-disengage the PTO of the tractor,
-stop the engine of the tractor,
-remove the ignition key from the dashboard and keep it,
-exit from the driver's seat,
