2312G INSTRUCTION MANUAL
56-101-00550-D INTRO
11/7/14
Page 1 / 20
INTRODUCTION
1. PUBLICATION BREAKDOWN
This publication, concerning the 2312G TURBINE TEMPERATURE INDICATING SYSTEM
TEST SET, establishes its standards of operation and maintenance.
This publication has been developed to provide instructions for complete testing and
troubleshooting of the temperature-indicating system and thermocouples installed on a turbine
type engine. Instructions are also provided for testing system resistance and insulation.
This publication contains the description, identification data, and operating procedures for
the: 2312G-8, -15, -22, -16A, -25, and -8 (see paragraph 2.B. below) Turbine Temperature
Indicating System Test Set, P/N’s 101-00550, -00551, -00552, -00554, -00555 and -00557,
Figure 1 (hereafter referred to as the 2312G).
Models -U and -8A, P/N’s 101-00553 and 101-00556 respectively, are special modified units
for specific applications requested by a manufacturer for individual requirements and are not
discussed in this text. If information is required, contact the manufacturer.
2. INFORMATION PROVIDED WITH THE UNIT
Besides this User Instruction Manual, the unit is provided with the four items described
below.
A. The identification label, similar to Figure 1, is located on the back of the tensiometer and
provides the following information:
Manufacturers' Name
Designation of Equipment
Equipment Part Number.
Equipment Serial No.
National Stock Number (for models -8 and -22 only)
Figure 1 IDENTIFICATION LABEL
TURBINE TEMP INDICATOR SYSTEM TEST SET
2312G
101-00550
