Barefoot Footprint01, Owner'S Manual

Page: 5 / 20

3
3.0 Inputs and Controls
1. [INPUT] XLR connector is designed to receive analog balanced line level audio signals from sources
such as preamplifiers, sound cards, monitor controllers and mixing consoles. Pin 1 is tied to
chassis ground. Pins 2 & 3 are fully floating differential inputs. Pin 3 must be referenced to
ground for single ended input signals. The analog signal is converted to 24bit/192kHz digital audio
via a precision, ultra
- high - fidelity analog to digital converter section inside the Footprint01.
2. [LEVEL] Eight position rotary switch adjusts the loudness in precise increments ( +3dB, 0, - 1, - 2, - 3,
- 5, - 7 and - 9dB. ) The 0dB setting corresponds to a sensitivity of 90dB at 1 meter distance using a
- 15dBv input signal.
3. [MEME IN] 3.5mm stereo phone jack for connection from MEME ™ Selector Switch. See Section 9
for MEME ™ settings and connection details. The default setting with no switch connected is Flat.
4. [MEME THRU] 3.5mm stereo phone jack for daisy chain connection to MEME IN of another
Barefoot monitor. See Section 9 for MEME
™ settings and connection details.
5. [USB] The universal serial bus connector is for factory adjustments and calibrations. This
connector is NOT an audio input.