![Barefoot Sound MicroMain35 Gen2 Owner'S Manual Download Page 5](http://html1.mh-extra.com/html/barefoot-sound/micromain35-gen2/micromain35-gen2_owners-manual_3834148005.webp)
4
5. Startup
1. Verify that the AC Voltage select switch on the rear panel is in the correct position for the AC voltage in your
facility (see warnings on pervious page for details) then plug in grounded mains power cable.
2. Set Input toggle switch to either analog (A) or digital (D) depending on the type of source signal you are
using. For digital signals also set the Channel toggle switch to left (L) or right (R) in accordance with the
speaker position.
3. Ensure that the audio signal is fully attenuated (AES3 signal requires digital attenuation).
4. Power on the speaker with the rocker switch located on the rear panel above the mains connector. The LED
indicator on the front of the speaker will illuminate Red for a couple of seconds then turn Aqua.
5. Turn up the audio signal and enjoy!
4. Connections
Analog:
Digital:
Analog Source
AES3 Source
* See Section 9 for Voice connection details.
AES/EBU
Splitter
Summary of Contents for MicroMain35 Gen2
Page 1: ...Owner s Manual...
Page 14: ...13 13 Drawing...
Page 16: ......
Page 17: ...Barefoot Sound LLC http barefootsound com 2013...