www.barebo.com
2. Pull out the cover
Silicon sealing
strips
NOTE:
When pull out and take down the cover, it is wrong to pull out the silicon sealing strips. If the strips are pulled out, pls
take down the other board. Make sure that the strips over the both sides are almost the same length, then you can put back
the board (the side with cable)
Press the cover in
this position
Take the cover out
in this position
3. Take down the cover
5. Take down the tube
4. Take down the lamp clip
6. Assemble the light in the reverse order
Please keep the accessories carefully !
Pull out the tube
jacket in this
position
NOTE:
When taking down the board ,
pls make sure that the inside rubber ring
is in the trough of the board
Tube replacing instruction
1. Take down the plastic baffle
(the side without cable)
