Bardiani YPA Instruction Manual Download Page 3

 

 

 

 

 

 

“BARDIANI reserves the right to modify without notice its products, including products already ordered”.

(GB-IST-YPA-0910)3/21

1.  Safety/Caution Signs

General WARNING sign, which indicates that special instructions MUST be 

followed to avoid serious personal injuries.

General CAUTION sign, which indicates that special instructions MUST be

 followed to avoid damage of equipment and environment.

Indicates IMPORTANT information, which improves the understanding of the 

instructions.

NOTE!

2.  General Safety Precautions

ALWAYS read the technical data before installation, operation and maintenance.

ALWAYS use authorised personal to install, operate and service the valve. The personal should 

know the valve and the instruction manual thoroughly.

ONLY use the valve for the designed purpose.

ALWAYS handle heavy valves carefully and use lifting tools where necessary.

ALWAYS pay attention to possible loose valve parts when unpacking the delivery.

ALWAYS connect air supply carefully and disconnect after use.

ALWAYS connect electrical supply carefully and disconnect after use.

NEVER touch moving valve parts.

NEVER touch a hot valve.

ALWAYS handle cleaning agents carefully.

NEVER remove a valve from piping or disassemble it when the valve or piping are pressurised.

 

We cannot be held responsible for incorrect installation, 

operation and maintenance! 

Summary of Contents for YPA






















Reviews: