Bardiani BBYP Instruction, Use And Maintenance Manual Download Page 14

Page: 14 / 114

Instruction, Use and Maintenance Manual

EN-IST-BBZP-0418

5. WELDING THE VALVE BODY ONTO PIPING:

Remove the body from the rest of the valve before proceeding with
welding operations. Please refer to the following pages in this manual.

CAUTION!

Hand crushing hazard. During operation there is a risk of crushing
inside the valve body in the area between the actuator and the valve
body.

6. MINIMUM MAINTENANCE CLEARANCES:

Make sure there is enough room around the valve for it to be
disassembled (with the control unit installed).

BBZP-BBZM - BBYP - BBZT - BBZR

A (mm)

B (mm)

C (mm)

10-25

240

32-40

265

255

280

270

290

285

300

100

325

315

125

410

400

150

440

425

CAUTION!

Bardiani Valvole S.p.A. declines all liability for any damage to things
and/or injuries to persons caused by any failure to correctly follow the
installation procedures.

Summary of Contents for BBYP



















































































































Search results

Summary of Contents for BBYP

Reviews:

Brands by name

Popular brands

Bardiani BBYP, Instruction, Use And Maintenance Manual

Search results

Summary of Contents for BBYP

Reviews:

Brands by name

Popular brands