Bard Site-Rite 6, Instructions For Use Manual

Page: 33 / 44

31
Instructions For Use
11 Service and Repair
There is no periodic or preventive maintenance required for the Site~Rite* 6 Ultrasound System,
probe or approved accessories.
For serving information or to return your Site~Rite* 6 Ultrasound System for repair, please contact
Bard Access Systems Technical / Clinical Support at (800) 443-3385.
Warning:
Only qualified personnel should attempt to service this equipment. The Site~Rite* 6
Ultrasound System contains static sensitive components and circuits. Failure to observe
proper static control procedures may result in damage to the system.
Warning:
Opening or servicing the scanner, probe, base power unit, or A/C adapter by anyone other
than Bard Access Systems authorized service personnel will void the warranty and may
result in injury or equipment damage.
12 Technical Specifications
12.1
Operating and Storage Conditions
Operating Temperature:
59°F to 100°F (15°C to 38°C)
Storage Temperature:
50°F to 100°F (10°C to 38°C)
Operating Humidity:
5% to 85% Relative Humidity (non-condensing)
Storage Humidity (packaged):
5% to 95% Relative Humidity (non-condensing)
Storage Humidity (unpackaged):
5% to 85% Relative Humidity (non-condensing)
12.2
Scanner Specifications
Dimensions:
12" W x 13" H x 5" D
Weight: 10 lbs.
Power Sources: A/C adapter, Internal and External DC Battery Pack
Power Consumption: 84 Watts Maximum
Monitor Size: 12.1” diagonal
IEC 60601-1: Class I, Type BF Applied Part, Continuous Operation, Internally Powered
Equipment, Not Category AP or APG Equipment, Not protected against
ingress of water.