Supercedes:
NEW
Page 1 of 2
BrightStat
User Interface Quick Start Guide
Manual 2100-679
Date 8-29-18
Date
Time
Blower Operation
Adjust by pressing the Fan Mode
button on the bottom
Auto Low Medium High
Current System Mode
Cooling Heating Auto Off
Up Arrow
Press to raise temperature setpoint
Temperature Setpoint
Current Temperature
Room Indoor Humidity
Outdoor Temperature
(if outdoor sensor is used)
Down Arrow
Press to lower temperature setpoint
System Mode
Select system mode
Temperature Units
Switch between Celsius or Fahrenheit
Help
Tap to view the help screen
Language
Tap to select preferred language
Fan Mode
Select fan mode
Occupancy Status
NOTE: Some of the parameters below are model dependent and may not appear on all room controllers.
General Notes
1. When any change is made to a parameter (temperature setpoint, fan setting, etc.), the value is automatically saved
in the room controller’s memory.
2. Arrows, when pressed for more than 2.5 seconds, scroll up or down at higher speed.
BrightStat