AREAS OF ATTENTION FOR THE USER
-
The CERA-1 ventilation system is connected to a central system, which balances the supply air to and the extract air from the home in a controlled way.
The system is designed to run constantly and therefore the plug (4) may not be removed from the power socket (this could disturb the operation of the system).
-
When the system is in Increased Mode, you may notice increased noise levels caused by the additional air fl owing through the ducts. This has no further impact on the operation
of the CERA-1 system.
-
The CERA unit is fi tted with a seal; only a qualifi ed installation engineer
(1)
may break or fi t the seal. If no seal has been fi tted, please contact the designated maintenance company
for your property or the affi liated Owners’ Association.
-
Orange seal: factory fi tting; CERA unit ready for installation.
-
Green seal: after commissioning; CERA unit ready for operation.
-
Blue seal: after service/maintenance; maintenance work has been carried out tot he CERA unit.
-
The user must at all times ensure that
1)
the unit remains accessible and moisture-free and
2)
the fl exible hoses and cables remain undamaged and are not trapped.
-
The CERA unit and/or its components must be kept free from any obsticals (we recommend keeping at least 15 cm of clear space around the system).
SAFETY REGULATIONS
-
These safety regulations must be observed by the user to avoid personal injury and/or damage to the CERA-1 ventilation system.
-
Do not use the product for purposes other than the one for which it is intended, as specifi ed in this manual (third-party modifi cations to the product are not permitted).
-
The CERA-1 ventilation system may not be connected to a kitchen hood, nor may it be used as an extractor for kettles, etc.
-
Do not allow children to play with the product and/or system.
-
Always handle electrical equipment with care: never touch the device with wet hands or when barefoot.
-
Avoid using fl ammable or volatile substances such as alcohol, insecticides, petrol, etc in the vicinity of the product.
-
Cleaning and maintenance may only be carried out by authorised third parties and only after the device has been disconnected from the power source.
-
Servicing/maintenance of the CERA-1 ventilation system may only be performed by qualifi ed installation engineers
(1)
in accordance with the applicable regulations.
-
Always make sure that the power system to which the product is connected meets the specifi ed conditions. The product may only be connected to 230 V 50 Hz AC mains power;
make sure not to damage the electrical circuit.
-
Keep the valves and/or diff users that are connected to the CERA-1 ventilation system free of obstacles and dirt - valve settings may not be altered.
(1) ) A qualifi ed installation engineer is someone who is employed by a central heating or mechanical installation company that is registered at the Chamber of Commerce.
MANUFACTURER
Barcol-Air B.V.
+31 (0)299 689 300
Cantekoogweg 10 - 12
1442 LG PURMEREND - The Netherlands
www.barcol-air.nl | www.cera-systeem.nl
Barcol-Air continuously sets out to further optimise the construction and quality of all the equipment. Barcol-Air reserves the right to make changes
to product specifi cations without prior notifi cation and free of obligation. S.E. & O.- © Barcol-Air B.V. 03-2019
General User Manual* version 1.0 | 03-2019
This is the General User Manual; project-specifi c CERA system solutions are provided with a specifi c User Manual.
G
ENERAL
U
SER
M
ANUAL
CERA-1
VENTILATION
SYSTEM
General User Manual CERA-1 | Page 2/2