![background image](http://html1.mh-extra.com/html/barco/xdx-series/xdx-series_installation-manual_4265120073.webp)
73
R5914481 /02 XDX
Required tools
Allen wrench 4 mm
How to remove
1.
Unlock the safety bracket on the side of the projector. Use a 4 mm Allen wrench to remove the two hex
screws locking the bracket (reference 1).
1
Image 7–3
2.
Rotate and move the bracket to a position it won’t hinder you while removing the rear cover.
3.
Slide the rear cover towards the bar of the frame (reference 2) as much as possible.
Note:
The handles do not click open. They are fixed into the cover.
2
3
Image 7–4 Sliding the front cover towards the frame bar and removing it.
4.
Tilt the rear cover a bit and remove it (reference 3).
7.3 Removal of the mains side cover
Required tools
Torx screwdriver T20
How to remove
1.
Remove the rear cover.
Summary of Contents for XDX Series
