![background image](http://html1.mh-extra.com/html/barco/xdx-series/xdx-series_installation-manual_4265120047.webp)
47
R5914481 /02 XDX
3
2
4
5
Image 4–10
2
UPS Power cord
3
Cable gland
4
Protected Earth (PE) wire
5
Power wires L and N
Tip:
Check for good fixation by pulling on each wire.
5.
Secure the AC power cord by fastening the cable gland (reference 3). Use a 24 mm open-end wrench.
6.
Place the net input cover back and seal it. Tighten the two screws (reference 1), using a T20 Torx
screwdriver.
4.5 Installation of a lens
How to install a lens into the B-lens holder, while using the optical adapter
1.
Place the lens holder in the “unlocked” position. Do this by pulling the lens lock handle (reference 1,
) outward and then towards the lens power supply socket (reference 2) as illustrated.
1
2
Image 4–11 Lens installation, preparing the lens holder
2.
Remove the dust cover from the lens opening.
Summary of Contents for XDX Series
