R5914477 /00
XDM
82
6.1 Removal of the front cover
If the front cover is the only cover you need to remove (e.g. when checking / replacing the filter),
there is no need to turn off the projector.
Required tools
Allen wrench 4 mm
How to remove
1.
Unlock the safety bracket on the side of the projector. Use a 4 mm Allen wrench to remove the hex screw
locking the bracket (reference 1).
1
Image 6
–
1
2.
Rotate and move the bracket to a position it won
’
t hinder you while removing the front cover.
3.
Slide the front cover to the side of the Input & Communication Unit towards the frame bar (reference 2)
and remove it (reference 3).
Note:
The handles do not click open. They are fixed into the cover.
2
3
Image 6
–
2 Sliding the front cover towards the frame bar and removing it.
Summary of Contents for XDM
