![background image](http://html1.mh-extra.com/html/barco/xdl/xdl_installation-manual_4060127041.webp)
41
R5906150 /05
XDL
How to shift the Lens Holder?
1.
Open the projector front cover. See
“
Opening the front and rear cover doors
, page 76
.
2.
Loosen the 4 screws (1) until the central part of the Lens Holder becomes loose. Use a 3 mm Allen
wrench.
3.
Shift the central part up or down as desired. The lowermost, middle and uppermost shift positions are
marked on the Lens Holder with a little arrow (2).
4.
Tighten the 4 screws (1) to a torque of
8.4 Nm
.
2
2
1
Image 4
–
9
5.
Close the front projector cover again.
4.6 Available lenses
Which lenses are available for my projector?
The table below is subject to changes and was last updated on 20/02/2018. Consult Barco's web
site for the most recent information about available lenses.
Order No
Type
Throw Range (4K)
R9852945
XLD
0.75
R9852950
XLD
1.0
R9852090
XLD
1.45 - 1.8
R9852092
XLD
1.8 - 2.4
R9852094
XLD
2.2 - 3
R9852100
XLD
2.8 - 5.5
R9852920
XLD
5.5 - 8.5
R9856506
HB
1.13 - 1.72
R9856294
HB
1.35 - 1.86
R9856297
HB
1.46 - 2.10
Summary of Contents for XDL
