![background image](http://html.mh-extra.com/html/barco/xdl-series/xdl-series_installation-manual_474397053.webp)
R5906150 /02
XDL
53
Required tools
•
Open end wrench 17 mm
•
Open end wrench 24 mm
How to align
1.
Place the projector in the desired location. Take into account the zoom range of the used lens and the size of
the screen.
2.
Project one of the internal patterns on the screen.
3.
Turn the adjustable feet in or out until the projected pattern has a perfect rectangle shape and is leveled. To do
so, proceed as follows
•
Loosen the long nut (reference 1 Image 5-3) on the threaded rod of the four projector feet. Use a 24 mm
open end wrench.
•
Adjust the height of the four legs to level the projector. Use a 17 mm open end wrench to adjust the height
as illustrated (reference 2 Image 5-3).
•
Secure the leg height by tightening the long nuts (reference 1 Image 5-3) of each projector foot against the
projector chassis.
1
1
2
Image 5-3: Level alignment
When this is achieved, the projector is set horizontal and vertical at right angles to the screen.
S
C
R
E
E
N
S
C
R
E
E
N
Image 5-4: Angle adjustment
5.3 Connecting the hoses with projector and
chillers
What has to be done?
The cooling circuit of the chiller(s) has to be connected with the cooling circuit of the projector. For that hoses
are needed. The length of the hoses depend on the position of the chillers in relation to the projector. The
maximum length is 10 meter!
Summary of Contents for XDL Series
