7. GUI – Image
Image 7-10
Advanced menu – Gamma
2. Use the
◄
or
►
key to change the gamma value between 1.0 and 2.8 . The default value is 2,2.
Tip:
The slider can be adjusted with a precision of 0.1.
Image 7-11
3. Use the
▲
or
▼
key to select
Sharpness
or
Contrast
.
Or,
go to
Home
-
Image
and select
Sharpness
or
Contrast
.
7.4
P7 Realcolor
Purpose
When blending images from multiple projectors, the perceived color coordinates of each projector can be altered to a desired com-
mon level, so that the projected colors are identical over all projectors used.
Alternatively, if you are unfamiliar with how adjusting the Colors to a speci
fi
c setting, there are also a certain number of presets
available, which forces the color output to speci
fi
c color standards.
The selection of the presets will vary, depending on the projector type and on the peripherals installed.
How to set custom P7 values
1. In the main menu, select
Image
→
Advanced
→
P7 Realcolor
.
Image 7-12
Advanced menu — P7 Realcolor
50
R5906151 XDL 17/04/2018
Summary of Contents for XDL-4K75
