6. GUI – Source
6. GUI – SOURCE
About the Source menu
This menu is used to select, review and con
fi
gure sources into the projector.
Overview of features
•
•
Displaying multiple sources: Stitched layouts
•
6.1
Displaying a single source
About selecting a source
Before a source can be projected, the source signal must be connected to the source input(s) of the device and a valid synchroniza-
tion signal must be available along with the source signal on at least one of the input connectors.
How to select?
1. Press
Menu
to activate the menus and select
Source
.
Image 6-1
Select Source
2. Press
OK
.
The
Select Source
menu is displayed with the actual available sources
fi
lled out.
3. Select the desired input.
6.2
Displaying multiple sources: Stitched layouts
About stitched layouts
The
fi
rst time you use a selected single source, the source will be displayed in the projector’s native resolution. If the resolution of
the source is different to the projector’s resolution, the image is stretched or shrunk.
It is however possible to con
fi
gure and display two or four source signals to make up one single image in full native resolution. This
is called a
Stitched Layout
: the sources are stitched together.
The following table lists which stitched layouts you can use, and in which display mode these layouts can be used.
The table below describes the different Stitch Layouts and scan directions.
Type of layout
Description
Available connectors
Mode
1
: Single
A single source is displayed in full
screen
Quad Combo input:
•
SDI (4x)
•
HDBaseT (2x)
•
DisplayPort
•
HDMI
Quad DP 1.2 Input:
•
DisplayPort (4x)
Mono / Active stereo
R5906151 XDL 17/04/2018
43
Summary of Contents for XDL-4K75
