![background image](http://html.mh-extra.com/html/barco/xdl-4k30/xdl-4k30_user-manual_474399116.webp)
R5906151 /02
XDL
116
Image 9-26: Lens Calibration menu
2.
In the Lens Calibration menu, select the desired calibration action and click
OK
.
You can select one of the following functions:
•
Horizontal shift
•
Vertical shift
•
Focus
•
Zoom
The text
Calibration in progress
will be displayed next to selected function until the calibration is completed.
When an error is detected, the message
Calibration Error
is displayed next to function.
9.11 Electronic Convergence
What can be done?
The convergence patterns can be used to check the convergence alignment of red, green and blue. If there is
a misalignment of at least one 1 pixel, an electronic realignment is possible.
Mechanical realignment of the convergence can only be done by a qualified service technician.
How to display the convergence settings
1.
In the main menu, navigate to
System Settings
→
Maintenance
→
Electronic Convergence
.
Image 9-27: Maintenance menu, Electronic Convergence
The Electronic Convergence menu is displayed.
Summary of Contents for XDL-4K30
