Barco XDL-4K30, User Manual

Page: 106 / 164

R5906151 /02 XDL 106
3. Use the ▲ or ▼ key to select Address and press OK button to activate the input box.
4. Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can be entered with the digit keys on the remote control or the local keypad. When a digit
is entered in that way, the next character will be selected automatically.
5. Repeat steps 4 and 5 for the Subnet mask and Default Gateway.
6. Select APPLY and click OK to confirm all changes.
When the connection is established, it is indicated with the connection symbol and the indication Connected .
9.2 IR control
Overview
•
Broadcast address
•
Projector address
•
IR sensors
9.2.1 Broadcast address
About broadcast address
Broadcast address is a common address that can be set on the projector. That can be “ 0 ” or “ 1 ” .
Any command coming from a remote control programmed with that common address will be executed.
How to the broadcast address
1. In the main menu, select System Settings → Communication → IR Control .
Image 9-5: Communication menu, IR control
The IR control menu is displayed.
Image 9-6: IR control menu
2. To change the broadcast address select the radio button of your choice.
GUI – System Settings