R59 76061 VS05 131099
17
STAND ALONE USE OF THE VS05
STAND ALONE USE OF THE VS05.
If supplied with an external DC voltage (between 15 and 20V/200mA), the VS05 can
switch the input source to projector or monitor. The analog picture controls on the
key pad of the VS05 are enabled.
Basic configuration.
Supply a DC voltage (15 - 20V/200mA) to pin 6 of the D-sub-9 connector labelled
'comm port'. Pin 5 and 9 are ground.
4
TV tuner, e.g. TVDM40 stereo
VCR
VCR S-VHS
VCR S-VHS
To projector
or monitor
DC power
supply
1
2
3
4
5
6
7
8
COMM. PORT
AUDIO
VIDEO MON.
OUTPUT
S-VIDEO
AUDIO INPUT
1
2
3
4
5
6
7
8
9
VIDEO INPUT
S-VIDEO INPUT
Input 9 is connected directly to projector
Connect your sources to the VS05 as described in Source connection to VS05.
5 video inputs and 3 S-Video inputs can be switched through to the outputs of the
VS05. The selection has to be done with the numeric keys on the button panel of
the VS05 (source 1 to 8, no source 9 -direct connection to the projector - available).