manualshive.com logo in svg

Barco VISION 3200LC, Owner'S Manual

Share
Download
Barco VISION 3200LC Owner'S Manual Download Page 33

7-5

Random Access Adjustment Mode

5975418A BARCOVISION 3200LC 290997

The first character is highlighted. Push the control disk to the right or

to the left to select the desired character. Change that character by

pushing the control disk up or down.  Numeric characters can be

entered directly with numeric keys on the RCU.

Press 

ENTER

 to confirm.  The renamed file is entered in the list of

files.

Press 

EXIT

 to return to the Rename menu selection.  No changes are

made.

Copy File

To copy a selected file into a new file.

Use the control disk to select COPY and press 

ENTER

.  The Copy

selection menu will be displayed.

Use the control disk to select a file name and press 

ENTER

 to select.

The Copy menu will be displayed with the selected file name already

filled in in the 'From file name :' area and in the 'To file name :' area.

Select with        or

then <ENTER>

<EXIT> to return.

Select with        or

then <ENTER>

<EXIT> to return.

Rename File

To change the name of a selected file.

Use the control disk to select RENAME and press 

ENTER

.  The

Rename selection menu will be displayed.

Use the control disk to select a file name and press 

ENTER

 to select.

The Rename menu will be displayed with the selected file name

already filled in in the 'From file name :' area and in the 'To file name:'

area.

Select with        or

<ENTER> to accept

<EXIT> to return.

FILE SERVICE

LOAD

EDIT

RENAME

COPY

DELETE

Select with       or

Reprogram with     or

or numeric keys

<ENTER> to confirm

<EXIT> to return

FILE SERVICE

LOAD

EDIT

RENAME

COPY

DELETE

Select with        or

<ENTER> to accept

<EXIT> to return.

Select with       or

Reprogram with     or

or numeric keys

<ENTER> to confirm

<EXIT> to return

The first character is highlighted. Push the control disk to the right or

to the left to select the desired character. Change that character by

pushing the control disk up or down.  Numeric characters can be

entered directly with numeric keys on the RCU.

Press 

ENTER

 to confirm.  The copied file is entered in the list of files.

Press 

EXIT

 to return to the Copy selection menu.  No copies are

made.

RENAME FILE

Filename

Src

Resolution

-----------------------------------------------------
ntsc         .s01

1

675x240i

ntsc         .c01

1

675x240i

ntsc         .s03

3

675x240i

-----------------------------------------------------
Active file : ntsc.c50

RENAME FILE

Frome file name :

ntsc.s01

To file name :

demo.c10

COPY FILE

Filename

Src

Resolution

-----------------------------------------------------
ntsc         .s01

1

675x240i

ntsc         .c01

1

675x240i

ntsc         .s03

3

675x240i

-----------------------------------------------------
Active file : ntsc.c50

COPY FILE

Frome file name :

vga_60.s03

To file name :

vga_60.c14

Summary of Contents for VISION 3200LC
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands