![background image](http://html.mh-extra.com/html/barco/ultra-reality-7000/ultra-reality-7000_owners-manual_474385081.webp)
11. Display setup
11.8 AutoImage Setup
What can be done ?
Autoimage allows to detect automatically the characteristics of the source (total pixels per line,...) and uses this information to adapt
the image to the LCD panels.
Autoimage can adapt the image based on following data :
•
Total pixels per line
•
Start pixel
•
Phase
•
Contrast/brightness levels
Autoimage works only for data signals.
How to set up AutoImage?
1. Press
MENU
to activate the Toolbar
2. Press
→
to select the
Display setup
item
3. Press
↓
to Pull down the
Display setup
menu
4. Use
↑
or
↓
to select
AutoImage setup
5. Press
ENTER
A dialogbox is displayed.
6. Use the arrow keys to select the desired item and press
ENTER
to activate or disactivate the item.
Image 11-9
Image 11-10
R5976455 BARCO ULTRA REALITY 7000 30062003
77
Summary of Contents for ULTRA REALITY 7000
