Barco ULTRA REALITY 7000 R9002810, Owner'S Manual

Page: 30 / 99

4. Getting started
Ceiling
Screen
IR sensor
RCU
Image 4-4
Hardwired Remote Input
1. Plug one end of the remote cable in the connector on the bottom of the RCU.
2. Plug the other end in the connector in the front panel of the projector labelled
RC
. (image 4-5)
SDI SDO
S-VIDEO
VIDEO
R G B V
7
2
4 3
10Base-T
G/Y B/PB H/C V
1
HDSDI
HDSDO 9
RS 232 IN
RS 232 OUT
RC
DVI
H/C
R/PR
95
Image 4-5
Directly to one of the IR sensors of the projector.
When using the wireless remote control, make sure you are within the effective operating distance (30m, 100ft in a straight line). The
remote control unit will not function properly if strong light strikes the sensor window or if there are obstacles between the remote
control unit and the projector IR sensor.
26 R5976455 BARCO ULTRA REALITY 7000 30062003