![background image](http://html1.mh-extra.com/html/barco/udx/udx_installation-manual_4258216090.webp)
R5906113 /08
UDX
90
2
1
Image 8-5: Mounting the laser range finder assembly onto the UDX
2.
Use the USB cable on the front side of the projector labeled
“
2
”
(reference 1, Image 8-5) and plug it in the USB
connector of the camera (reference 2, Image 8-1).
3.
Use the USB cable on the front side of the projector labeled
“
3
”
(reference 2, Image 8-5) and plug it in the USB
connector of the laser range finder (reference 3, Image 8-1).
4.
If you want to install the optional battery holder, remove the left cover. See
“
”
, page
5.
Mount the battery holder as illustrated. Use a T10 Torx wrench to tighten the two screws.
Image 8-6: Mounting the battery holder
6.
Connect the plug of the battery holder to the connector of the laser range finder assembly (reference 1,
Image 8-1).
7.
Place two AA batteries in the battery holder.
Finishing the installation
1.
If the battery holder was installed, mount the left cover. See
“
2.
Mount the front cover with the new cover plate. See
“
8.3 Adjusting the laser range finder
Required tools
Phillips screwdriver PH1
Summary of Contents for UDX
