![background image](http://html1.mh-extra.com/html/barco/udx-series/udx-series_installation-manual_3839978066.webp)
R5906113 /09
UDX
66
5.4 Replacement of the synthetic air filter
WARNING:
Switch off the projector and unplug the power cord before starting the procedure.
Required parts
New synthetic filter
How to remove
1.
Remove the front cover. See
“
”
, page 80.
2.
Push both filter holders to the outside and flip the filter out of the holder as illustrated.
Image 5-3: Remove old filter
3.
Remove the filter and insert a new one.
Caution:
Take notice of the air flow direction of the filter (made visible by a label). Make sure the arrow
points towards the inside of the projector.
4.
Install the front cover. See
“
, page 84
CAUTION:
Never clean the filter. Always replace with a new one.
CAUTION:
Never use the projector with removed filters !
Summary of Contents for UDX Series
