Barco UDX Series, Installation Manual

Page: 49 / 100

R5906113 /09 UDX 49
4.4 Lens removal
How to remove
1. Support the lens with one hand while you unlock the lens holder by sliding the primary lock handle outwards
and then towards the
“ unlocked ” position as illustrated (Image 4-9).
Image 4-9: Unlock the lens
2. Pull down the secondary lock on the lower left side of the lens holder as illustrated (Image 4-10).
3. Gently pull the lens out of the lens holder.
Image 4-10: Lens removal
It's recommended to place the lens caps of the original lens packaging back on both sides of the
removed lens to protect the optics of the lens.
It's recommended to place the dust cover of the original projector packaging back into the lens
opening to prevent intrusion of dust.
Installation procedures