![background image](http://html1.mh-extra.com/html/barco/udx-4k32/udx-4k32_user-manual_3869477050.webp)
8. GUI – Installation
Image 8-10
Screen size
2. Select either
Screen width
or
Screen height
.
3. Set the new value to shrink either the width or height of the warp outline so that the outline is equal with the active source.
Tip:
A red border will be projected along with the current image. The border is a visual tool, showing the result of the adjusted
outline.
4. Click
Apply
.
8.3.4
Warping – 4 corners adjustment
About 4 Corners adjustment
4 corner adjustment is typically used when the mechanical installation of the projector prevents it from pointing perpendicularly at
the screen. For example, you can overshoot the screen and use 4 corner adjustment to pull your projected image corners back into
the screen.
Some examples:
Image 8-11
4 corner adjustment
How to adjust the image?
1. In the main menu, select
Installation
→
Warp
→
4Corners
.
Image 8-12
Warp menu, 4Corners
46
R5906112 UDX SERIES 24/05/2017
Summary of Contents for UDX 4K32
