![background image](http://html1.mh-extra.com/html/barco/udx-4k22/udx-4k22_installation-manual_3870620055.webp)
5. Input & Communication
R5906113 UDX 07/07/2017
51
5.2
Removal of an input board
W
ARNING
:
The procedures below may only be performed by Barco trained and qualified technicians.
C
AUTION
:
Always wear a wrist band which is connected to the ground while handling the electrostatic dis-
charge (ESD) sensitive parts.
The procedure below is applicable to all the input modules of the Input & Communication Unit of the projector.
How to remove
1. Switch off the projector and unplug the power cord at the projector back side.
2. Release the 3 captive screws of the input module (4).
Image 5-2
3. Pull out the input module of the Input & Communication using the handles.
4
4
4
Summary of Contents for UDX 4K22
