![background image](http://html1.mh-extra.com/html/barco/transform-a/transform-a_service-manual_3828475040.webp)
Barco – TransForm A – DOC-3358-2 – service manual – Revision 06 – March 2007
__________________________________________________________________________
4-2
4.1
Inserting additional main memory in the Processor
Depending on type and configuration of the P
ROCESSOR
it can be enhanced with additional memory.
P
ROCESSOR
type
standard configuration
maximal advisable system memory
(depending on configuration of the system)
AGS-3328-1/-2
2×256 MB DDR RAM
2 GB
AGS-3389-0/-1
2×512 MB DDR2 RAM
3 GB
AGS-3390-1/-2
2×1 GB DDR2 FB RAM
4 GB
Table 4-1
Before inserting additional main memory Check the feasibility of additional main memory
before starting the procedure, please refer to sections
4.3.4 System load within an OmniBus
and
4.3.5 System load within a Processor configuration
It is highly recommended to get DIMMs from Barco. Please, refer to section
order numbers
of the TransForm A user’s manual. If you use other memory modules Barco cannot
guarantee for proper and stable system function.
Slot 1 Channel A
Slot 3 Channel A
Slot 2 Channel B
Slot 4 Channel B
Bank 1 Slot A
Bank 2 Slot A
Bank 3 Slot A
Bank 4 Slot A
Figure 4-1
Inserting additional memory, AGS-3398 (left) and AGS-3390-1/-2 (right)
Memory modules are made of delicate electronic components that are extremely sensitive
to static electricity. Ordinary amounts of static from your clothes or work environment can
destroy them. Transport memory modules only in the original packaging as delivered from
the manufacturer. Handle them only by the edges. Do not touch the components. Use a
grounded workplace and wear a grounding wrist strap; at least, discharge your body’s static
electricity by touching a grounded surface, e. g., a properly grounded system’s metal
chassis.