Barco SP-20, Installation Manual

Page: 30 / 55

4. Proper and safe use of the foot system
4.1 Folding out the foot system into the 80° stand
This procedure can be performed by one person.
W
ARNING
:
Preferably wear protective gloves for this operation.
How to fold out the foot system?
1. Fold out both feet, pulling the top of the pro fi le indicated in the illustration.
Warning: Make sure you are positioned between the feet so you can not be hurt when the feet fall down!
PULL PULL
Image 4-1
2. The feet are now positioned as illustrated below. Push the tile forward until the guiding pin has fallen into the fi rst groove of booth
feet.
Note: The fi rst groove is indicated with the red circle.
Warning: Do not push the tile further forward then necessary. Doing so can damage the shader and can trow you out off
balance.
Warning: Always fi rmly hold the SP-20 tile with both hands.
26 R59770294 SP-20 11/02/2009